磨具绿碳化硅砂 喷砂绿碳化硅 研磨绿碳化硅 抛光用绿碳化硅磨料

磨具绿碳化硅砂 喷砂绿碳化硅 研磨绿碳化硅 抛光用绿碳化硅磨料

一、绿碳化硅简介：

绿碳化硅生产方式与黑碳化硅基本相同，只是对原材料的要求不同。绿碳化硅是以石油焦和优质硅石为主要原料,添加食盐作为添加剂，通过电阻炉高温冶炼而成，经冶炼成的结晶体纯度高，硬度大，其硬度介于刚玉和金刚石之间，机械强度高于刚玉。

First, the introduction of green silicon carbide:

The production of green silicon carbide is basically the same as that of black carborundum, but it is only different to the requirements of the raw material. Green silicon carbide is made of petroleum coke and high-quality silica as the main raw material and salt as additive. It is made by high temperature smelting of resistance furnace. The crystal made by smelting is of high purity and hardness, and its hardness is between corundum and diamond, and its mechanical strength is higher than corundum.

　　二、绿碳化硅生产工艺：

绿碳化硅制造方法同黑色碳化硅，但采用的原材料纯度要求较高，也在电阻炉中2200°C左右的高温下形成，绿色，呈半透明状，六方晶形，其Sic含量较黑色为高，物理性能与黑色碳化硅相近，但性能略较黑色为脆，也具有较好的导热性与半导体特性。

Two. The production process of green silicon carbide:

Green silicon carbide manufacturing method with black silicon carbide, but the purity of raw materials required, but also the formation of high temperature, 2200 degrees C, under the resistance furnace green, translucent, six crystal, the content of Sic was higher than that of black, physical properties and performance of black silicon carbide is similar, but slightly black crisp it has good thermal conductivity and semiconductor properties.

　　三、绿碳化硅用途：

　　绿碳化硅被广泛运用于磨料行业，最主要的运用于制作砂轮，切割片等，绿碳化硅，还用于坩埚，半导体材料，高温硅碳棒发热体，远红外源基材等。。

1、有色金属冶炼工业的应用

　　我公司的碳化硅具有耐高温,强度大,导热性能良好,抗冲击,作高温间接加热材料,如坚罐蒸馏炉,精馏炉塔盘,铝电解槽,铜熔化炉内衬,锌粉炉用弧型板,热电偶保护管等.

2、钢铁行业方面的应用

　　我公司利用碳化硅的耐腐蚀,抗热冲击耐磨损,导热好的特点,用于大型高炉内衬提高了使用寿命.清洁非常坚硬的表面。

3、冶金铸造行业的应用

　　碳化硅可作为冶金脱氧剂和耐高温材料，功能陶瓷、高级耐火材料、磨料及冶金原料或研磨抛光材料。还可以做化工涂料。我公司的碳化硅硬度仅次于金刚石,具有较强的耐磨性能,是耐磨管道,叶轮.泵室.旋流器,矿斗内衬的理想材料,其耐磨性能是铸铁.橡胶使用寿命的520倍,也是航空飞行跑道的理想材料之一。

4、建材陶瓷,砂轮工业方面的应用

　　利用其导热系数.热辐射,高热强度大的特性,制造薄板窑具,不仅能减少窑具容量,还提高了窑炉的装容量和产品质量,缩短了生产周期,是陶瓷釉面烘烤烧结理想的间接材料.还可以用来做磨具，如砂轮、油石、磨头、碳化硅棒，砂瓦类等。

5、节能方面的应用利用良好的导热和热稳定性,作热交换器,燃耗减少20,节约燃料35,使生产率提高20-30,特别是矿山选厂用排放输送管道的内部,其耐磨程度是普通耐磨材料的67倍.

6、玉器宝石研磨抛光

　　配合超声波机械震动钻孔机使用在细孔的钻孔上，提高了时间效率，钢模喷砂，用在深度大的喷砂雕刻，如：石材雕刻等。玉器宝石的抛光，达到镜面光亮的优质效果。

7、酞阳能线切割应用

我公司的碳化硅是高纯度的单晶，可用于制造半导体、制造碳化硅纤维，用于酞阳能前切割，保证了碳化硅切割微粉的优良切割性能和稳定的物理状，磨料磨具的碳化硅微粉作为切割刃料的均衡自锐性，从而保证被切割材料TTV的最小化。有高的热震稳定性和荷重软化温度，这确保了在荷重切割时的小的线膨胀系数，从而保证切割的稳定;并且能够和切割机有很好的适配。

Three. Use of green silicon carbide:

Green silicon carbide is widely used in abrasive industry, mainly used in the production of grinding wheel, cutting disc, green silicon carbide, also a crucible for semiconductor material, silicon carbide, high temperature heating, far infrared source material..

1. Application of non-ferrous metal smelting industry

Our company"s silicon carbide has high temperature resistance, high strength, good thermal conductivity and impact resistance. It is used as high temperature indirect heating material, such as strong pot distillation furnace, rectifying furnace tray, aluminum electrolytic cell, copper melting furnace lining, zinc powder arc plate, thermocouple protection tube and so on.

2, the application of iron and steel industry

Our company makes use of silicon carbide"s corrosion resistance, heat shock resistance, abrasion resistance and good heat conduction characteristics. It is used for large blast furnace lining to improve its service life. It"s very hard to clean the surface.

3. Application of metallurgical industry

Silicon carbide can be used as a metallurgical deoxidizer and high temperature resistant material, functional ceramics, advanced refractory materials, abrasive and metallurgical materials or grinding and polishing materials. Chemical coatings can also be made. Our company"s silicon carbide hardness is second only to diamond, and has strong wear resistance. It is a wearable pipe, impeller, pump chamber, cyclone, and ideal material for ore lining. Its wear resistance is 5 to 20 times of cast iron and its service life. It is also one of the ideal materials for aviation runway.

4. The application of building material ceramics and grinding wheel industry

With its thermal conductivity, heat radiation, high strength characteristics, manufacturing kiln sheet, which can not only reduce the kiln capacity, but also increase the installed furnace capacity and product quality, shorten the production cycle, indirect material ceramic glaze baking sintering ideal. It can also be used to make the grinding tool, such as grinding wheel, Whetstone, grinding head, silicon carbide bar, sand tile, etc..

5, energy saving applications, using good heat conduction and thermal stability as heat exchangers, reduce fuel consumption by 20, save fuel 35, and increase productivity by 20-30. Especially, the wear resistance of the mine drainage pipeline is 6 to 7 times that of ordinary wear resistant materials.

6. Grinding and polishing of jade jewels

The ultrasonic vibration drilling machine is used for drilling holes, which improves the time efficiency and steel mould sandblasting. It is used for deep sand blasting, such as stone carving, etc. The polishing of jade jewels can achieve the best effect of the mirror bright.

7. Application of solar line cutting

Our company is a single crystal of high purity silicon carbide, can be used for manufacturing semiconductor, silicon carbide fiber, used for solar energy before cutting, ensure excellent cutting performance and physical shape stability of silicon carbide cutting powder, silicon carbide powder as abrasive cutting edge material balance self sharpening, so as to ensure the minimum cut material TTV. It has high thermal shock stability and load softening temperature, which ensures small linear expansion coefficient when load is cut, so as to ensure the stability of cutting. And it can be well fitted with the cutting machine.

　　四、绿碳化硅规格：

1、绿碳化硅段砂：0-1mm，1-3mm，3-5mm，5-8mm

2、绿碳化硅粒度砂(号砂)：16#，20#，24#，30#，36#，46#，60#，80#，100#，120#，150#，180#，200#，220#，325#。

3、绿碳化硅微粉：400#，600#，800#，1000#，1200#，1500#，2000#，2500#，3000#。

Four, green silicon carbide specification:

1. The sands of green silicon carbide: 0-1mm, 1-3mm, 3-5mm, 5-8mm

2,:16#, 20#, 24#, 30#, 36#, 46#, 60#, 80#, 100#, 120#, 150#, 180#, 180#, 180#, 180#.

3. Green silicon carbide powder: 400#, 600#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000

巩义市鸿乐矿产品有限公司
地址：河南省巩义市永安路北段
销售经理：李艳丽
2643704420
网址：

Gongyi City Hongle Mineral products Co. Ltd.
Add:North section of Yongan road in Gongyi
Miss Li
2643704420