气动常闭工业制动器常闭制动器弹簧制动刹车驻车制动器

KBS5弹簧制动气动释放

厚度为25.4-30-40mm的制动盘同样适用, 产品代号不同

Available also for disc thickness 25,4 - 30 - 40 mm.

技术数据

制动力F：

KBS5-1 2625 N

KBS5-2 5250 N

KBS5-3 10400 N

动态力矩

=F*[制动盘半径(m)-0.033]=Nm

Z大总磨损： 12 mm

新摩擦片厚度： 11 mm

持续滑动时的热容量Qc: 3.4 kW

松钳Z小气压： 5 bar

图表显示数据依据如下条件:

5-1装有4根弹簧

5-2和5-3装有8根弹簧

若要减少力矩值可相应地减少弹簧数量：

5-1 2根弹簧

5-2和5-3 6、4、2弹簧

图表指示了每毫米摩擦片磨损的力矩变化情况。

如需恢复到相应额定力矩，请按照使用手册说明进行调整。

Technical data

Braking force F:

KBS5-1 2625 N

KBS5-2 5250 N

KBS5-3 10400 N

Dynamic torque

= F*(disc radius in m - 0.033) = Nm

Max total wear: 12 mm

Thickness of new lining: 11 mm

Continuous thermal capacity Qc: 3.4 kW

Minimum release pressure: 5 bar

The torque values specified

are obtained with n. 4 springs for 5-1,

n. 8 springs for 5-2 and 5-3.

Torque proportionally less

are achievable with n. 2 springs for 5-1,

n. 6-4-2 springs for 5-2 and 5-3.

The diagram shows the torque

variation for each millimeter

of linings wear.

Adjust according to ensure the

correct torque value is achieved.

KBS7弹簧制动气动释放

技术数据

制动力F：

KBS7-1 14150 N

KBS7-2 26600 N

KBS7-3 32000 N

动态力矩

=F*[制动盘半径(m)-0.065]=Nm

Z大总磨损：:12 mm

新摩擦片厚度：13 mm

持续滑动时的热容量Qc: 20 kW

松钳Z小气压: 5 bar

图表显示数据依据如下条件:

7-1装有8根弹簧

7-2和7-3装有12根弹簧

若要减少力矩值可相应地减少弹簧数量：

7-1 6、4、2根弹簧

7-2和7-3 10、8、6根弹簧

图表指示了每毫米摩擦片磨损的力矩变化情况。

如需恢复到相应额定力矩，请按照使用手册说明进行调整。

Technical data

Braking force F:

KBS7-1 14150 N

KBS7-2 26600 N

KBS7-3 32000 N

Dynamic torque

= F*(disc radius in m - 0.065) = Nm

Max total wear: 12 mm

Thickness of new lining: 13 mm

Continuous thermal capacity Qc: 20 kW

Minimum release pressure: 5 bar

The torque values specified

are obtained with

No. 8 springs for 7-1,

No. 12 springs for 7-2 and 7-3.

Torque proportionally less

are achievable with

No. 6-4-2 springs for 7-1,

No. 10-8-6 springs for 7-2 and 7-3.

The diagram shows the torque

variation for each millimeter

of linings wear.

Adjust according to ensure the

correct torque value is achieved.