JY-YT230气田采出水消泡剂

JY-YT230气田采出水消泡剂

JY-YT230 Defoamer for gas field produced water

1. 产品特性 Features

由改性聚硅氧烷、聚硅氧烷、白炭黑与分散剂等组成方

It is composed of modified polysiloxane, polysiloxane, white carbon black and dispersant.

宽广的 PH 和温度适用范围

Wide pH and temperature range

快速消泡和长效抑泡

Rapid defoaming and long-term foam suppression

水中易分散

Easily dispersed in water

2. 典型物性 Physical property data

3. 应用领域 Application

石油采气，天然气井; Oil and gas production, natural gas wells;

石油钻井泥浆; Oil drilling mud;

石油钻井液，固井体系其它的水相泡沫;

Petroleum drilling fluids, cementing systems and other water-phase foams;

其它的水相泡沫Other water phase foams

4. 使用方法 Instructions

JY-YT230 可在泡沫产生后添加或作为抑泡组份加入产品中;

JY-YT230 can be added after foam is generated or added to the product as a foam suppressing component;

根据不同使用体系，JY-YT230 的添加量可为 10~1000ppm，具体添加量由客户根据具体情况试验决定。

According to different usage systems, the addition amount of JY-YT230 can be 10~1000ppm. The specific addition amount is determined by the customer based on the specific situation.

JY-YT230 可直接使用，也可稀释后使用。如在起泡体系中能充分搅拌分散，可以直接添加，无需稀释。如需稀释，请使用增稠水进行。直接用水稀释产品的方法不可取，容易出现分层破乳等现象，从而影响产品品质。

JY-YT230 can be used directly or diluted. If it can be fully stirred and dispersed in the foaming system, it can be added directly without dilution. If dilution is required, use thickened water. It is not advisable to dilute the product directly with water, as it is prone to stratification and demulsification, thus affecting product quality.

5. 包装和贮存及注意事项 Packaging & Storage and Precautions

1. 采用 25kg 或 200kg 塑桶包装。如有特殊要求可协商定制,

Packed in 25kg or 200kg plastic drums or as request

2. 常温保存(5~40℃℃)，避免阳光直射。

Store at room temperature (5~40℃) and avoid direct sunlight.

3. 在建议的储存温度及未开封包装的条件下，自生产之日起，保质期为6个月。

Under the recommended storage temperature and unopened packaging conditions, the warranty is 6 months from the date of production.