太和人行天桥栏杆厂家河道边景观围栏桥梁防撞护栏

太和人行天桥栏杆厂家河道边景观围栏桥梁防撞护栏

Taihe pedestrian bridge railing manufacturers river side landscape fence bridge collision barrier

桥式防撞杆的目的是防止不受控制的车辆越过桥梁，具有防止车辆穿越、穿越、跨越桥梁和美化桥梁建筑的功能。如何安装桥式防撞栏杆。桥式防撞杆制造商会带你去了解。在铁路分类中，在长度孔的一侧安装防水裂缝。安装固定垂直线：在工作台上在工作台上，防水垫放在均匀的一侧。固定垂直面对面防水垫放在铁路一侧。拧紧螺丝：螺丝按顺时针方向拧紧螺丝，制造固定轴和框架的障碍物。普通安装:阀杆底部有两个孔的垂直杆沿同一方向插入杆中。安装上卡和下卡:卡路里上卡、卡头卡。首先安装卡。在u形夹的一侧插入一条垂直线。用一个特殊的夹子夹到槽的位置并自动弹开。然后根据法律安装该卡。安装错误时，也可以使用螺丝刀。垂直线夹会被冲走。组装完成:依次完成后，检查每条垂直线是否固定，完成组装工作。

The purpose of the bridge anti-collision rod is to prevent uncontrolled vehicles from crossing the bridge, and has the function of preventing vehicles from crossing, crossing, crossing the bridge and beautifying the bridge construction. How to install bridge anti-collision railings. The bridge rod manufacturer will show you. In railway classification, a waterproof crack is installed on one side of the length hole. Install fixed vertical lines: on the workbench, the waterproof pad is placed on the uniform side of the workbench. Fixed vertical face to face waterproof pads placed on the side of the railway. Tighten the screws: Screws tighten the screws in a clockwise direction to create obstacles that hold the shaft and frame in place. Ordinary installation: A vertical rod with two holes at the bottom of the valve stem is inserted into the rod in the same direction. Install up and down card: calorie up card, card head card. First install the card. Insert a vertical line on one side of the U-clamp. Use a special clip to clamp into the slot position and automatically pop open. Then install the card according to the law. If the installation is incorrect, you can also use a screwdriver. The vertical clip will wash away. Assembly completed: After completion in turn, check whether each vertical line is fixed and complete the assembly work.