ZMX30-2B
Random mold preparation
一. Brief introduction:
This machine is equipped with punching and shearing section, three bending processing station, the two functions can work at the same time the main function of processing copper, aluminum bus bar of different specification, at work, only need to choose the corresponding processing station, can be convenient and fast for copper, LvPai shear, punching, round hole, slotted hole), folding bending, bending, u-shaped bend, embossing, planish, twist and so on a variety of different processing.
二. Main Features:
1. The shear station adopts double column shear structure, with smooth shear mouth and no waste.
2. The bending station adopts enclosed bending structure, which is strong and durable. After bending, the Angle of the workpiece is consistent from top to bottom. By changing the mold, the function of embossing can be realized at this station. The single embossing area is 80*160mm, and the end face is flat and even.
3. The punching station adopts the single-arm integral structure, which improves the concentricity of the mould, extends the service life of the mould and saves the time of changing the mould.
4. Any machining unit can be transformed into NUMERICAL control type on the basis of the host machine, so as to improve the efficiency and machining accuracy.
5. The hydraulic oil tank adopts 3mm steel plate welding and phosphating treatment, effectively ensuring that the hydraulic system and components are free from pollution and corrosion.
7. The hydraulic hose adopts national standard Type A connection, which is durable and easy to maintain.
三. Basic parameters:
1、Nominal pressure |
300KN |
2、Processing size |
15×160mm |
3、Punching range |
Φ4.3~25mm |
4、Vertical bending width |
120mm |
5、The workbench |
A layer of:1500mm×1200mm On the second floor:940mm×420mm |
6、Machine dimensions |
1750mm×1350mm×1500mm |
7、Machine weight |
1410kg |
四. Main configuration:
1 the main motor |
Jiangsu yancheng |
2 pieces |
2、Hydraulic oil pump |
custom |
2 pieces |
3、Thermal relay |
omron |
2 pieces |
4、Solenoid directional valve |
Maple yi |
6 pieces |
5、Overflow valve |
Maple yi |
2 pieces |
6、Ac contactor |
omron |
2 pieces |
五.Attached accessories:
8 sets of punching die (optional specification), 1 set of scissors, 2 sets of vertical bending and horizontal bending, 1 set of U-shaped bending mold, 1 set of embossing, 1 set of random maintenance tools and accessories, and 3 pedal switches.