Walkersele ® D6 — most popular design
This is the standard Walkersele ® design. It is suitable for the vast majority of bearing protection and other radial lip seal applications across most sectors of industry.
Special features
• Lip profile minimises heat generation and shaft wear.
• Geometry gives lip flexibility to accommodate shaft eccentricity.
• Fabric-backed (retained) versions can be supplied as spit-types, and as Walkersele ® OSJ-2 for On-Site Joining.
• Operates at up to 20kPa/0.2bar (3psi) pressure differential, or up to 200kPa/2bar (29psi) with lip support plate.
Walkersele ® D6 availability — standard ranges
JW Charts 56 and 57 cover standard ranges of our Walkersele M1/D6 fabric-backed (retained) version in inch and metric sizes respectively. These can be supplied in endless or split form — note the different part numbers on charts.JW Charts 104 and 105 cover our self-retaining Walkersele M6/D6 seals in inch and metric sizes respectively. JW Chart 376 covers self-retaining Walkersele M6/D6/M seals conforming to DIN 3760 and the equivalent BS ISO 6194 standards, as previously covered by BS 1399.
Walkersele ® D6 availability — non-standard sizes Existing tools — we have thousands of Walkersele moulds,including a vast number for non-standard sizes. If the D6 size you want is not on the JW Charts, please contact us to check mould availability. If we have a suitable tool, your seal can be supplied on short delivery time without tooling charges.Specials — new tools are swiftly made in-house for non-standard sizes. In such cases a tooling charge will be applied. Seals for shaft diameters from 25mm to 2200mm (1 inch to 87 inch) are produced by conventional moulding methods. Sizes above this, and up to unlimited diameter, are manufactured using our highly developed mould-joining technique.
冀公网安备13010402002588