潍坊JC-1500工业布袋集尘机

本系列产品主机采用透浦式中压风机、高压风机，具有结构简单、能耗低、噪音少、运作稳定、过滤效率高清灰效果高、占用空间小、拆卸灰斗方便快捷、使用年限长、维护容易、移动操作灵活、工作稳定等显著性能优点，而且造价相当低廉，是理想的环保设备。

This series product host the transparent pu type medium pressure and high pressure fan fan, has simple structure, low energy consumption, less noise and stable operation, high filtration efficiency hd effect, take up the space is lttle, convenient remove ash hopper,long service life, easy maintenance, mobile and other significant performance advantages of flexible operation, stable work, and relatively low cost, is the ideal environmental protection equipment.

集尘机含尘气体在中压风机的离心力作用下进入除尘器匀流室，进人匀流室后由于气流断面突然扩大及气流分布板作用，气流中一部分粗大颗粒在动和惯性力作用下直接沉降到灰斗;粒度细、密度小的尘粒进入各滤尘室后，通过布朗扩散和筛滤等组合效应，使粉尘沉降在滤芯表面上，净化后的气体进入净气室由排风管经风机排出。设备的阻力随着滤袋表面粉尘层厚度的增加而增大。阻力达到某-设定值时进行清灰。此时打开集尘器压缩空气开关以极短的时间通过压缩气缸，井在逆向气流冲刷的作用下，使气缸板产生上下振动，使附着在滤袋外表面上的粉尘被剥离落入灰斗中。

The dust containing gas of the dust collector enters the dust collector's uniform flow chamber under the action of the centrifugal force of the medium-pressure fan. After the fine particle size and small density enters each filter chamber, the dust precipitates on the surface of

the filter core through combined effects such as brown diffusion and screen fltration, and the purified gas enters the cdlean air chamber and is discharged by the exhaust pipe through the fan. The resistance of the equipment increases with the increase of the thickness of the dust

layer on the surface of the filter bag. Remove dust when resistance reaches a set value. At this time, open the dust collector compressed air switch to pass through the cylinder in a very short time, and under the action of reverse airflow scour, make the cylinder plate vibrate up and

down, so that the dust attached on the outer surface of the filter bag is stripped and dropped into the ash hopper.

使用范围：

1、机械加工制造业：清理各种金属切屑和粉尘，特别是铸铁加工更显示其优越性。

2、玻璃纤维制造业：吸收玻璃纤维产品制造中的硬化表面打磨产生的粉尘和残渣。

3、食品行业：吸收食品残渣。

4、微电子工业：用于生产车间的除尘、净化及剪切费料的回收。

5、铸造业：用于清理浇注坑、炉前坑中的炉渣，废金属渣块；清除铸造过程中产生的的废砂、金属毛刺、氧化铁皮；清理淤泥。

6、钢铁厂：车间及设备输送带、转运站、高层平台、行车、轧机表面的清洁工作；减少停机时间，提高生产效率。

7、汽车轮船制造：用于内部焊渣、粉尘、污物的清除及喷漆前的打磨除尘作业。

等集尘净化除尘作业。